东莞市粤光光电科技有限公司为您免费提供广州LED灯珠、广州LED灯珠价格,广州LED大功率灯珠等信息和资讯,敬请关注!
产品展示
新闻动态
联系我们

东莞市粤光光电科技有限公司

地   址:广东省东莞市塘厦镇石鼓村亿方慧谷工业园C2栋6楼

联系人:

电   话:0769-82617688

网   址:http://gz.yggdled.com

广州3216贴片红外接收头 当前位置:首页 >> 产品展示

广州3216贴片红外接收头
 http://gz.yggdled.com/product41065.html 

红外线射管系列有F8(8MM)LED发光二极管、F8(8MM)LED灯珠等产品。

贴片红外接收头正贴反贴都可以,本接收头可以匹配市场上所有的红外发射管,或者我司直插发射管 贴片发射管,大功率发射管!详细资料请咨询我司销售工程师。

Notes: 1.All dimensions are in millimeters
2.Tolerances unless dimensions ±0.1mm

 
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Units
Collector-Emitter Voltage VCEO 30 V
Emitter-Collector-Voltage VECO 5 V
Collector Current IC 20 mA
Operating Temperature Topr -25 ~ +85 ℃
Storage Temperature Tstg -40 ~ +85 ℃
Soldering Temperature *1 Tsol 260 ℃
Power Dissipation at(or below)
25℃Free Air Temperature
Pc 75 mW
Notes: *1:Soldering time≦5 seconds.
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition

相关标签: